Cornford 4 x 12 Angled Cab. Celestion V30's

All general Cornford Amplification discussion goes in here, plus photos, videos, sound clips and artist news...

Moderator: Gadget

Post Reply
StevieC
New Here
New Here
Posts: 2
Joined: Tue Jul 23, 2013 8:58 pm

Cornford 4 x 12 Angled Cab. Celestion V30's

Post by StevieC » Wed Aug 28, 2013 12:37 pm

Hi, CAn anyone tell me something about this cab. I bought it to use on stage but it's different to my others. It's Thicker at the front by almost double. The Logo is screwed in with standard screws. All else seems the same including the sound. Can't figure out how to post a picture but will happily send one if interested.

SabbadiusUSA
Master Volume
Master Volume
Posts: 199
Joined: Tue Apr 17, 2012 4:11 pm

Re: Cornford 4 x 12 Angled Cab. Celestion V30's

Post by SabbadiusUSA » Fri Aug 30, 2013 4:13 am

My newer 4x12 is the same way. SE increased the thickness of the baffle-board from 9mm to something like 27mm, but don't quote me on that... Measure it, and report back. Pine cabs tend to resonate quite a bit, so I suspect this was done to lessen the effect. Mine has wider bracing in it also. I tried to mount the speakers inside, but there's not enough room. Had no problems doing this with my early Cornford 4x12.

StevieC
New Here
New Here
Posts: 2
Joined: Tue Jul 23, 2013 8:58 pm

Re: Cornford 4 x 12 Angled Cab. Celestion V30's

Post by StevieC » Fri Aug 30, 2013 5:27 pm

Thanks for that. I can't work out how to post pictures yet but when I do, I'll offer them for more comment.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest